Take me Home
Lowest Prices Available!

Call Today: 1.800.878.7829

Serving You

The Falcon XL - Gate and Door Opening Sensor

The falcon will allow uni- or bi-directional sensing, and the unique ability to open a door when traffic is moving away from the sensor.

Gate and Door Opening Sensor

Refining Gate and Door Opening Sensor.
Redefining the capabilities of opening sensors.



Fully Customizable to your application:

    • -The falcon will allow uni- or bi-directional sensing, and the unique ability to open a door when traffic is moving away from the sensor.
    • -The Sensor can also be set to discriminate between pedestrian and vehicular traffic.
    • -An excellent alternative to loop detectors.

  • Universally compatible with and gate or industrial door:
    • -Whether your application is an industrial slide gate or swing gate or a simple GTO/PRO 1000 post mount the sensor can be set vertically from 0 to 180 degrees.
    • -There is an optional extension bracket that allows the Falcon to be mounted up to 3 ft. away from the gate.

  • Tough construction to handle the most extreme conditions:
    • -The ABS/Polycarbonate construction is NEMA-4 rated [completely dustproof and weatherproof], can operate from -22 to 140 degree F and offers high immunity to electrical, mechanical, weather-related, and radio interferences.

    • Fast and Easy to set up and tune:
      • -After mounting the Falcon, you can put your ladder away. All key parameters of the sensor such as sensitivity, relay, hold time and configuration, pedestrian discrimination, and detection mode- can be made via remote control.
      • -Once set, adjustments can easily be made from ground level.

      Saves energy and increases productivity:
      • -The falcon's state-of-the-art microprocessor and flat antenna provide the ability to disregard pedestrians and only allow large masses (such as trucks and forklifts) to be detected even at lower mounting heights. In addition, the Falcon is capable of disregarding traffic parallel to the door, which can open a door unnecessarily.
      • a

Falcon Door Sensor can be used for inside Gate as a gate opener option

  1. Green LED
  2. Receiver
  3. Red LED
  4. Planar antenna
  5. NEMA 4 Connector
  6. Adjustable mounting bracket for wall or ceiling mounting

Sensitivity Adjustment Possibilities:

Set the Falcon Sensor a number of ways for your personal use

  1. H=16' / Tilt angle = 30
  2. H=11' / Tilt angle = 30
  3. H=8' / Tilt angle = 30 (XL Version)


  1. Technology: Microwave and microprocessor
  2. Transmitter frequency: 24.125 GHz
  3. Transmitter radiated power: <20 dBm EIRP
  4. Transmitter power density: < 5 mW/cm²
  5. Mounting height
    FALCON: from 11.5 to 23’
    FALCON XL: from 6.5 to 11.5’
  6. Tilt angle: 0° to 180° in elevation
    Detection zone (typical)
  7. Wide pattern (FALCON XL): 13’ (W) x 6.5’ (D)
    for a mounting height of 8.2’
  8. Narrow pattern (FALCON): 13’ (W) x 16’ (D)
    for a mounting height of 16’
  9. Detection mode: movement
  10. Minimum detection speed: 2.2 in/s (measured in the
    sensor axis)
  11. Supply voltage: 12V to 24V AC +/- 10%
    12V to 24V DC +30% / -10%
  12. Mains frequency: 50 to 60 Hz
    Power consumption: < 2W
  13. Output relay: free of potential changeover contact
  14. Max contact voltage : 42V AC/ DC
  15. Max contact current: 1A (resistive)
  16. Max switching power: 30W (DC) / 60 VA (AC)
  17. Hold time: 0.5s to 9s (adjustable)
  18. Manual adjustment:
    · orientation of sensing field (mechanically)
    · multiple functions (by push buttons).
  19. Remote control adjustments:
    · Sensitivity.
    · Hold time.
    · Detection mode.
    · Pedestrian and parallel traffic rejection mode.
    · Relay configuration.
  20. Temperature range : -22°F to 122°F (-30°C to +60°C)
  21. Degree of protection: IP65
  22. Product conformity:
    R&TTE 1999/5/EC
    EMC 89/336/EEC
  23. Dimensions : 5 in (D) x 4 in (W) x 3 ¾ (H)
    (127mm (D) x 102 mm (W) x 96mm (H))
    Weight: 0.88 lbs (400 g)
  24. Housing Material: ABS and Polycarbonate
  25. Bracket Material: black anodized aluminum
  26. Cable length: 33 ft (10 m)
  27. Cable diameter: 1/8” (3 mm) (minimum)
    1/4” (6.5 mm) (maximum)

Falcon Ordering Information
Product Info
Mounting Height
Unit Price
Low Mounting Industrial Motion Sensor
7' - 11'

High Mounting Industrial Motion Sensor
11.5' - 23'

Easy Set up Remote

Need a Industrial Infared Presence Detector? Click here