SW2000XL and SW2002XL GTO/PRO Authorized Dealer - Great Products at a Great Price

The GTO/PRO SW2000XL is a common selection for the basic residential gate application. Designed to address most chain link, tubular steel, vinyl, wood, aluminum and ornamental gate applications.

Guaranteed Lowest Prices on the Internet!! Call 800.878.7829!

Part #	Description	List Price	Our Price	Buy Now
PRO2000XL	GTO/PRO2000XL Single Gate Operator	~~$745.98~~	$529.00
PRO2002XL	GTO/PRO2002XL Master & Slave Gate Operator (Complete Dual Gate Kit)	~~$913.12~~	$799.00
RB741	RB741 Mini Push Button Remote	~~$48.50~~	$18.50
347IH	Push-to-Open 11" Post Pivot Bracket	~~$56.50~~	$25.50

Note: This model cannot accommodate column mounting when the distance of
lines A & B (in picture above) combined length is greater than 14 inches.
The GTO/PRO SW4000XL can accommodate the combined length over 14 inches.

Compare GTO/PRO on
Performance - Price - Quality - Warranty

GTO/PRO 2000XL Residential Series

FEATURES
• Features GTO/PRO’s true soft start and stop operation.
Open and close times from 15 seconds.
• Full systems capable, single/dual control board includes an
adjustable obstruction sensing, gate sequencing and auto
close settings.
• U.L. rated for Class I, II, III & IV. System certified to be in
compliance with U.L. 325, 5th edition..

Click here for More Information on GTO/PRO Gate Openers Accessories

Technical Specifications

DRIVE

Powered by: a reliable 12 Volt (120 Watt)
DC motor, 16:1 planetary gear drive system.
Temperature rating: of motor:-5°F (-28°C)
to +160°F (71°C) battery rating
Opening time: From 15 seconds.
Range of arm stroke: is up to 11” (.3 m)
Operator length with arm fully retracted is
33.75” (85.2 cm), mounting point to mounting point.

POWER

The PRO-SW2000XL system is powered by one 12 Volt DC / 7.0 amp hour, sealed,
rechargeable battery (included). Battery
charge is maintained by a120V AC/60
Htz input and 18V AC at 40 VA. output
transformer, rectified to 14V DC through
control board.

OPTIONS

Solar Panel Charger: silicon alloy panel.
Generates minimum of 10 watts at 600 mA. A gated diode on the
control board prevents battery discharge. (FM123)
The PRO-SW2002XL kit contains both the master arm and slave
operator arm with a 32 foot (9.8m) power cable for a dual gate
application.
Push to open applications: Require one (349IH) bracket
per operator.

CONTROLS

• The GTO/PRO® control board can be programmed for
pull-to-open or push-to-open.
• Adjustable auto close, obstruction sensitivity and dual gate
sequencing.
• One button auto-memorization of digital transmitter code.
• Charging regulated circuit on control board. “Sleep draw”
is 20 mA; “active draw” is 2 to 7 amps.
• GTO/PRO® remote-mounted 318 MHz RF receiver and one
button transmitter included.

Guaranteed Lowest Prices on the Internet!!

Call us with further questions we are pleased to serve you.
(800) 878-7829
Our business is "Automatic gate operators" .