Powered by a reliable 12 volt DC motor, totally enclosed
gear drive system.
Temperature rating of motor: -5° F (-28°
C ) to +160° F ( 71° C).
Opening time is 18-24 seconds.
Range of arm stroke is up to 19 (48 cm). Operator
length with arm fully retracted is 37.25 (95 cm),
mounting point to mounting point.
The PRO-SW1500 system is designed to be powered
by a standard automotive or marine 12V battery. A weatherproof
battery box is required and can be found in most hardware,
automotive, marine, or home center store locations.
Battery charge maintained by a 120 V AC/60 Htz input
and 18 V AC at 40 VA. output, transformer rectified to 14
V DC through the GTO Control Board.
The GTO/PRO control board can be programmed for pull-to-open
Adjustable auto close, obstruction sensitivity and
dual gate sequencing.
Auto-memorization of digital transmitter code.
Charging regulated circuit on control board. Sleep
draw is 40 mA; active draw is 2 to 5 amps.
GTO/PRO remote-mounted RF receiver tuned to 318 MHz.