(800)878-7829

• Self-contained keyless entry system ideal for airports, hospitals, warehouses, office building, parking lots, and many other commercial facilities
• Rugged cast aluminum enclosure for indoor or outdoor mounting on a wall or pedestal. ·
• Four independent outputs and timers: two form C relays and two solid-state open collector outputs.
• Accepts 480 entry codes, 480 Block code transmitters, plus one fully supervised safety edge transmitter.
• Two LED indicators show system status.
• Easy-to-program, Easy to use keypad
• Key operating features include: key sense input; inhibit input; request-to-enter input' alarm shunt output; timed anti-passback' and keypad lockout.
• Down light illuminates whenever keypad is used.
• Tactile and audible feedback when keys are pressed
• Keylock secures keypad to mounting backplate.
• Built in radio receiver

The Linear AKR-1 is a digital keypad entry system that includes a built-in radio receiver. It allows use of up to 480 block coded transmitters, in addition to 480 traditional keypad entry codes. Users can be assigned either type of code for system access.

Two relay outputs are provided:one for gate or door access; the other for gate obstacle control using the MGT, the industry's only supervised safety edge transmitter. If an MGT is not used the second relay can control another door or gate.

Installation and set-up are simple. The AKR-1 operates on 12-24 volts, ac or dc. It can be powered directly from the radio power output of most gate operators. Learning suspending, or deleting entry codes or transmitters is as easy as pressing a few key on the AKR-1's built in keypad. Program data is stored in low-volatile EEPROM; data retention is in excess of 10 years, even in the event of a power failure

The AKR-1 keypad is compatible with all Linear's block coded transmitters, which are programmed and supplied in sequential order. Each transmitter is labeled with its unique ID code and also has a facility code. The combination of these two codes provides the same level of security as a traditional Wiegand swipe or proximity card.

General Specifications

Outputs

Relay: two form "C" relays rated at 1A @ 24 Vac or Vdc, one for control and the one for obstacle.

Display: Two LED's for system activity and program information.

Sounder: Programmable activation from key presses or output activation

Inputs

RF: integral 318 MHz super regererative receiver @ -95 dBm sensitivity (nominal); receives Linear block code transmitters

Open Request: Terminal input activates the programmed control relay

Door Sense/Inhibit: monitors status of a protected dooor or can be programmed to restrict access to relay 1

Keypad: Monitors status of a protected door or can be programmed to restrict access to realy 1

Power

12 to 24 Vac or Vdc; 150 mA maximum

Operating Temperature

-22 degree to +149 degree F (-30 degree to +65 degree C)

Dimensions

4.00 in W x 7.00 H x 3.00 in D (101.6 x 177.8 x 76.2 mm)

Standard Equipment

AKR-1 keypad with built-in receiver and integral vandal-resistant antenna